Process Design Engineer Job at Spectra Tech, Greenville, SC

eE9idmRsU09ha2w0amZSekZKa2V4am4yMHc9PQ==
  • Spectra Tech
  • Greenville, SC

Job Description


Process Principal Design Engineer

The purpose of this position is to provide the essential administrative processes, technical knowledge and leadership as described below. This position has oversight of a specific project area and acts as a representative of the engineering discipline ensuring technical accuracy in project execution in all phases. This is a lead position on assigned projects performing engineering assignments of advanced complexity.

· Under general supervision of the Discipline Lead Engineer, serve as a Supervising Lead providing guidance/supervision to other engineers and designers

· Analyze and make independent recommendations regarding technical solutions to problems of advanced complexity in accordance with project requirements

· Develop and review specifications and design criteria

· Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of advanced complexity

· Coordinate technical issues with other disciplines, project management, vendors and clients

· Execute work in compliance with Project Quality Plan and procedures

· Execute work in accordance with the approved project scope, cost and schedule baselines

· Develop and review estimates, schedules and progress reports including effort-hour estimating and staff forecasting

· Establish, control and report on material key quantities; provide analysis and forecasts

· Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals

· Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes

· Other duties as assigned

Basic Job Requirements

· U.S. Citizenship required

· Bachelor of Science degree in Chemical or Nuclear Engineering and minimum fifteen (15) years of work-related experience

· Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards

· Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors

· Job related technical knowledge necessary to complete the job

· Advanced knowledge of discipline codes and standards

· Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines

· Ability to attend to detail and work in a time-conscious and time-effective manner

· Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs

· Significant experience providing engineering, procurement and construction (EPC) services on large industrial projects

· Proficiency executing large EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD) automation tools in a multi-discipline environment

Discipline Specific Job Requirements

· Prepare and review calculations and specifications relating to Piping & Instrumentation Diagram (P&ID) development

· Demonstrated design experience in areas such as utility and/or process systems and specification

· Advanced knowledge in development of the following:

Process design criteria; process calculations; process simulation

Hazops/Process Hazards Analysis

Heat and material balances; utility summaries/balances

Block flow diagrams; process flow diagrams

Piping and instrumentation diagrams (P&IDs)

Equipment list

Equipment process datasheets

Control systems datasheets

Functional logic narratives

Piping design data / line list; tie-in data

— Hazardous area classification

Power requirement - electrical load list

Preferred Qualifications

· Professional Engineer license

· Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1

· Advanced knowledge of commercial availability and cost of materials

· Demonstrated experience managing and leading large projects

· Proficiency with project set-up, development of control-level schedules, progress reporting and project close-out

· Practical field experience

· EPC project experience for the following industries:

U.S Department of Energy or other U.S. Federal Government Agency

Nuclear facilities under a nuclear quality assurance program

Manufacturing, pharmaceutical or biotechnology

Process Senior Design Engineer

The purpose of this position is to provide the essential administrative processes, technical knowledge and leadership as described below. This position has oversight of a specific area and acts as a representative of the engineering discipline ensuring technical accuracy in project execution in all phases. This is a lead position on assigned projects performing engineering assignments of advanced complexity.

· Under general supervision of the Discipline Lead Engineer, serve as an Area Lead providing guidance/supervision to other engineers and designers

· Analyze and make independent recommendations regarding technical solutions to problems of advanced complexity in accordance with project requirements

· Develop and review specifications and design criteria

· Perform and check engineering analyses and calculations; specify materials, equipment and systems; and solve technical problems of advanced complexity

· Coordinate technical issues with other disciplines, project management, vendors and clients

· Execute work in compliance with Project Quality Plan and procedures

· Execute work in accordance with the approved project scope, cost and schedule baselines

· Develop and review estimates, schedules and progress reports including effort-hour estimating and staff forecasting

· Establish, control and report on material key quantities; provide analysis and forecasts

· Provide technical support to activities associated with equipment and material procurement and subcontracting including scopes of work, technical bid evaluations and review of vendor submittals

· Provide technical support to activities associated with construction administration including response to construction requests-for-information and field changes

· Other duties as assigned

Basic Job Requirements

· U.S. Citizenship required

· Bachelor of Science degree in Chemical or Nuclear Engineering and minimum ten (10) years of work-related experience

· Working knowledge of applicable federal (including Department of Energy orders), state, and local codes and standards

· Ability to communicate effectively with audiences that include but are not limited to project management, coworkers, clients, vendors, and subcontractors

· Job related technical knowledge necessary to complete the job

· Advanced knowledge of discipline codes and standards

· Ability to perform work in compliance with applicable local, state, and federal codes, statutes and guidelines

· Ability to attend to detail and work in a time-conscious and time-effective manner

· Intermediate computer and software skills to include proficiency in the use of word processing, e-mail, spreadsheet and electronic presentation programs

· Significant experience providing engineering, procurement and construction (EPC) services on large industrial projects

· Proficiency executing large EPC projects utilizing engineering analysis, 3D modeling and 2D computer-aided drafting and design (CADD) automation tools in a multi-discipline environment

Discipline Specific Job Requirements

· Prepare and review calculations and specifications relating to Piping & Instrumentation Diagram (P&ID) development

· Demonstrated design experience in areas such as utility and/or process systems and specification

· Intermediate knowledge in development of the following:

Process design criteria; process calculations; process simulation

Hazops/Process Hazards Analysis

Heat and material balances; utility summaries/balances

Block flow diagrams; process flow diagrams

Piping and instrumentation diagrams (P&IDs)

Equipment list

Equipment process datasheets

Control systems datasheets

Functional logic narratives

Piping design data/line list; tie-in data

— Hazardous area classification
Power requirement - electrical load list

Preferred Qualifications

· Professional Engineer license

· Experience with design of systems, structures and components for nuclear facilities under the requirements of ASME NQA-1

· Advanced knowledge of commercial availability and cost of materials

· Demonstrated experience managing and leading large projects

· Proficiency with project set-up, development of control-level schedules, progress reporting and project close-out

· Practical field experience

· EPC project experience for the following industries:

U.S Department of Energy or other U.S. Federal Government Agency

Nuclear facilities under a nuclear quality assurance program

Manufacturing, pharmaceutical or biotechnology

· Proficiency in reading and working with P&IDs

Job Tags

For subcontractor, Local area,

Similar Jobs

Dunkin'

DunkinTeam Members Job at Dunkin'

 ...Restaurant located in Fairfield NJ. This is a Drive Thru location. Our product line features Hot, Cold, and Frozen Beverages, Sandwiches, Bagels, Donuts, Ice Cream Cakes, Ice Cream treats and Beverages as well. Our Staff is treated like family and we promote from within.... 

Schneider Electric

Mechanical Engineer Intern Job at Schneider Electric

Schneider Electric has an opportunity for a Summer 2025 Mechanical Engineer Intern in Franklin, TN . This position will be responsible for performing entry-level mechanical engineering activities associated with design of Medium Voltage Equipment for new product development...

Aramark

Event and Marketing Coordinator Job at Aramark

 ...Seeking an Event and Marketing Coordinator to craft memorable moments at our corporate caf food hall. Must have a passion for customer service, creative mind, and basic computer skills. Pay is $17/hr. This account is open Monday- Friday 6:30am-3:30pm, in the Plano/Frisco... 

USA DeBusk, LLC

Dry Bulk Tanker Driver - Class A CDL Operator Job at USA DeBusk, LLC

 ...body for handling, positioning, moving, and manipulating equipment and materials and vacuum truck operations. The Vacuum Operator/CDL Driver will be responsible for driving and operating efficiently and safely all power equipment and vehicles in accordance with DOT laws... 

First Coast Hispanic Chamber of Commerce

Account Associate - State Farm Agent Team Member - Kathy Scott State Farm Insurance Job at First Coast Hispanic Chamber of Commerce

Position titleAccount Associate - State Farm Agent Team Member - Kathy Scott State Farm Insurance...  ...motivated individuals. If you want to work in an environment that is fun, challenging...  ...needs, including:~Auto insurance~Home insurance~Life insurance~Retirement...